heat coil
英 [hiːt kɔɪl]
美 [hiːt kɔɪl]
热熔线圈；加热盘管
双语例句
- Analysis of Influencing Factors for Heat Transfer in Heat Exchange Coil Units of Closed Cooling Tower
闭式冷却塔内换热盘管的热传递影响因素分析塔格里伯密闭式试验器 - The thermal source of the motor, the equivalent coefficient of heat conductivity for stator coil and coefficient of heat radiation in the air duct and airgap by forced air circulation are analyzed.
建立了三相异步牵引电机温度场分析的有限元模型，分析了电机的发热源、定子线圈等效导热系数、强迫通风冷却条件下通风沟内和气隙内气流的散热系数。 - Where part of a heat is rolled into an as-rolled structural product and the balance of the heat is rolled into coil, each part shall be tested separately.
一个炉号的钢水的其中一部分轧制为轧制结构钢产品，同炉号的其余部分钢水轧制为钢卷，每个部分分别进行试验。 - This paper discussed about how to confirm the mould dimension of the heat exchanger manufactured with titanium coil pipe ( TA2).
讨论了钛盘管加热器在制作时，如何确定弯曲模具的尺寸。 - One reason for this choice is that anodised aluminium is light, rigid and helps conduct heat away from the voice coil, which, in this case, is thermally bonded to it.
这种选择的原因之一是重量轻而且硬度大的阳极氧化铝盆体有助于单元线圈的散热，在AE200中，金属盆体以热合方式和单元线圈连成一体。 - And the performance of the main heating equipment using in the two systems including heat pump and fan coil were analyzed.
并且分析了所使用的主要采暖设备热泵、风机盘管的性能分析。 - Design of the heat transfer coil pipe in an agitated horizontal autoclave
卧式搅拌釜传热蛇管设计 - An analysis of the cause of pitting corrosion failure of heat exchange coil is made by means of X-ray energy spectrometer in this paper.
利用化学分析和X射线能量色散谱等方法，对换热器盘管孔蚀的原因进行了分析。 - The cool point and heat point temperature of the coil were studied under the annealing process.
研究了退火过程中钢卷冷点与热点温度的变化规律。 - The behaviors of flow and heat transfer in helical coil steam generator during the start up processes were experimentally investigated.
针对快速和安全启动的要求，实验研究了螺旋管蒸汽发生器在同步启动过程中的流动和传热特性，并分析了各种参数对启动安全和启动时间的影响。 - Then, the dynamic heat exchange of a coil heat exchanger was simulated and some conclusions were drawn in terms of its regular laws of heat exchange.
以此为基础，对风机盘管换热器的换热进行了动态仿真模拟，得到了风机盘管换热器换热量随各进口参数扰动而发生变化的一般性规律。 - Study on Roll Gap of Bending Roll of Heat Coil Box and Its Starting-up Speed
热卷箱弯曲辊辊缝及抬起速度探讨 - Numerical simulation of heat transfer in coil annealing furnace is very important to the determination of annealing time and the prediction of mechanical property for steel sheets.
模拟罩式退火温度场对确定和优化钢板的退火制度、预报钢板的机械性能极为重要。 - The calculation method of the coil temperature rise in SF6 gas insulated transformer under nature gas circulation is introduced. The effects of power loss and heat dissipation on the coil temperature rise are also discussed in this paper.
本文分析了自冷式SF6气体绝缘变压器线圈温升的计算方法，并对变压器功率损耗与散热情况对线圈温升的影响进行了讨论。 - Reasons for the reactor steam heat coil distortion are analyzed. Study on Roll Gap of Bending Roll of Heat Coil Box and Its Starting-up Speed
对内部安装有蒸汽加热盘管且为间断式工作的反应釜蒸汽加热盘管变形的原因进行了探讨。热卷箱弯曲辊辊缝及抬起速度探讨 - Transient Flow and Heat Transfer in Helical Coil Steam Generator
螺旋管蒸汽发生器的瞬态流动与传热特性 - There are two types of heat exchangers: coil sterilizer and tubular sterilizer.
管式灭菌机分为盘管式灭菌机和列管式灭菌机两种。 - Experimental Study of Heat Transfer of Plane Coil Tubes
不同盘绕方式平面盘管传热特性的实验研究 - The corrosion problem of heat exchange coil has become the key factor restricting the progress of evaporative condenser.
换热盘管的腐蚀问题已成为制约蒸发式冷凝器发展的关键因素。 - By using ABAQUS software, force convection elements were adopted to simulate the heat transfer between the coil and the forced convective hydrogen.
应用ABAQUS软件的强制对流单元，研究了在特定的气体流动条件下的钢卷与气体之间的传热。 - By theoretical and experimental analysis, the heat transfer enhancement mechanism of twined coil insert is discussed, the theoretical model of condensation heat transfer enhanced by twined coil insert is built and the experimental investigation is carried out.
对绕花丝内插物的强化换热机理进行了理论分析，建立了绕花丝强化管内凝结换热理论模型，并进行了实验研究。 - Failure analysis of heat coil made of austenitic stainless steels in an oil refinery unit
再生器中奥氏体不锈钢取热盘管失效原因分析 - The heat transfer model was developed and the heat transfer of the coil during cooling was analyzed.
分析了热轧钢卷冷却的传热过程，建立了钢卷冷却过程的传热模型。 - By means of setting up the equivalent thermal circuit, the way to heat dissipation of the stator coil winding is given and temperature rise influence on coil winding is legitimately treated.
给出了定子线圈绕组传热途径，建立了等效热路图模型，合理处理了温升对线圈绕组阻值的影响。 - The innovation and contributions of this thesis are as follows: 1. A simplified heat transfer model of fan coil is established for wet condition.
本文的主要创新工作及贡献包括：1.建立了一种适用于湿工况的风机盘管的简化传热模型。 - There are three kinds of fluid in the heat and mass transfer process of evaporative condenser, which are the refrigerant steam condensated in the heat transfer coil tubes, and air and water mutually flow outside coil tubes.
蒸发式冷凝器的工作过程存在着三种流体间的传热传质：制冷剂蒸气在换热盘管管内冷凝，管外有水流和空气流的相互流动。 - The mutual flow of air, water and refrigerant is variety, therefore there are many kinds of evaporative condenser. But the heat transfer coil tubes of the evaporative condenser is indispensable and also the most important in the process.
空气流、水流和制冷工质流的相互流动方式多种多样，因此，蒸发式冷凝器有许多种结构形式，但是换热盘管部分是过程中不可缺少的，也是最重要的。